Skip to content
Waterproof Kids Pillow Protector & Encasement | Child Standard 50×69cm | AU
Waterproof Kids Pillow Protector & Encasement | Child Standard 50×69cm | AU
This waterproof dust mite kids pillow protector zips your child’s whole pillow inside a soft, quiet barrier, so the build-up stays sealed in, and spills, drool and accidents stay out.
- Seals your child’s whole pillow inside — zipped closed
- Waterproof microporous TPU membrane, third-party pore-size tested
- Soft, quiet jersey — no plastic crinkle
- Machine washable up to 60°C
Safe sleep: Red Nose Australia recommends babies under 12 months sleep without a pillow. This protector is for older children who already use a pillow.
Couldn't load pickup availability
Waterproof dust mite kids pillow protector
Allergy specialists recommend dust mite covers.
It’s on ASCIA’s list of practical steps for reducing dust mite allergen at home — and it’s the one that keeps working while you sleep.
ASCIA recommends covering mattresses, pillows and quilts with dust mite resistant covers.
ASCIA allergen minimisation guidance — the peak allergy body for Australia and New Zealand.
Encasings produced a significant long-term reduction in dust mite allergen over 12 months.
Randomised, double-blind controlled trial. Halken et al., 2003, Journal of Allergy and Clinical Immunology.
Safe sleep: Red Nose Australia recommends babies under 12 months sleep without a pillow. This protector is for older children who already use a pillow.
ASCIA, the peak body of allergy specialists in Australia, recommends dust mite covers as part of minimising exposure. Neither ASCIA nor the researchers cited endorse a particular brand.
Built as a barrier
Waterproof. Breathable. Quiet.
A microporous TPU membrane sits behind a soft knitted jersey. It stops liquids and fine particles, lets water vapour through, and feels like fabric — not plastic.
0.16 µm
Our tightest barrier.
Every pore measured under 1 micron in third-party testing — the finest barrier we sell.
360°
Zipped all the way closed.
The whole kids pillow sealed inside the barrier — not an open-ended or envelope-style cover.
Dry
Waterproof.
Spills, drool and sweat stay on the surface and out of your pillow.
0
Raw seam edges. Sealed at the seams, not just the zip.
Seams are where cheaper covers leak. Ours are folded and bound closed, so the barrier carries right to the edges.
Quiet
No crinkle.
Soft knitted jersey on the outside, so it feels and sounds like fabric — and it breathes, unlike vinyl or PVC.
What the research shows
Your child’s pillowcase gets washed. The pillow inside doesn’t.
A 12-month randomised controlled trial found that mattress and pillow encasings produced a significant long-term reduction in dust mite allergen. Covering the pillow is part of what worked.
Halken et al., 2003, Journal of Allergy and Clinical Immunology.You wash the pillowcase.
Not the pillow.
Your child’s face rests on their pillow for hours every night, and washing the pillowcase never reaches what’s built up inside — or what a spill leaves behind.
The easier answer: zip it on once.
Dust mite allergen stays sealed in. Spills stay out.
Why a standard waterproof protector isn’t enough
Standard waterproof pillow protector vs dust mite kids pillow protector.
A standard waterproof protector is made for spills. A dust mite protector is made to be a barrier on every side — and the difference is in the details.
| Standard waterproof pillow protector | This dust mite protector | |
|---|---|---|
| Fabric | Often a vinyl or PVC-backed cover | Soft knitted jersey with a microporous TPU membrane |
| Coverage | Often an open or envelope end | Zipped fully closed |
| Feel | Vinyl and PVC types can crinkle and feel hot | Quiet, and lets water vapour through |
| Pore size | Rarely tested or published | Third-party tested: most common 0.16 µm, every pore under 1 µm |
| Made for | Spills | Spills and a barrier against dust mite allergen build-up |
Tested, not guessed.
How small are the gaps in the membrane?
Most of the tiny gaps in the membrane are about 0.16 microns wide, and every gap measured is under 1 micron. A micron is one-thousandth of a millimetre — far too small to see.
In plain terms: the droppings that carry dust mite allergen are more than 60 times bigger than most of the gaps in this membrane. Even the biggest gap measured is 13 times too small for them.
Is it right for you?
Who this waterproof dust mite kids pillow protector is for.
Made for you if…
- You want a dust mite barrier and spill protection in one.
- Drool, toilet training or sick days are part of life at your place.
- You want the tightest barrier we sell — every pore under 1 micron.
- You want proof: a third-party tested membrane, not just a promise.
Choose another option if…
- You sleep hot or prefer natural fibre — choose our 100% cotton protector.
Less work than what you’re doing now
Fit it once. Then it just works.
Waterproof or cotton dust mite protector?
Both zip fully closed and are third-party pore-size tested.
Waterproof
This one · our tightest barrier
Tightly woven cotton
Most breathable
Everything you get
More than a cover.
- ✓Waterproof dust mite kids pillow protectorFull zip, sealed on every side, every pore under 1 micron
- ✓Third-party pore-size test reportAsk us for a copy any time
- ✓12-month warrantyAgainst manufacturing defects, on top of your Australian Consumer Law rights
- ✓Free shipping over $150Australia-wide, dispatched in 1–3 business days
- ✓Real answers from a dust mite specialistNot sure on size or fabric? Email us before you buy
Bundle and save
Their pillow is one of three.
Protect your child’s whole bed.
ASCIA recommends covering the mattress, pillows and quilt. In a single or king single bed? The waterproof whole-bed bundle covers all three (with a standard-size pillow protector), plus a Mattress Mate slip-on for easy weekly washing — and saves 10% on buying them separately.
Shop the whole-bed bundleTonight
Three steps. Then forget about it.
- 1Zip it on.Slide your pillow in and zip it closed. Done in seconds.
- 2Make the bed.Your normal pillowcase goes straight over the top and gets washed weekly as usual.
- 3Sleep.Wash it every couple of months, or straight away after a spill. That’s the whole routine.
Step one of a proven plan
Start with the bed. Then build on it.
A 2018 review by allergy researchers at the University of Virginia describes combining several measures as more likely to succeed than any single step (Wilson & Platts-Mills). Covers are a sensible place to start. Here is what the research says works alongside them.
Encase the bed and hot-wash weekly.
Covers on the mattress, pillows and quilt. Research found water at 55°C or above was effective at reducing dust mite populations in bedding (McDonald & Tovey, 1992).
Shop bundles ›Keep humidity below 50%.
Homes kept below 51% humidity for 17 months had 98% fewer live dust mites (Arlian et al., 2001).
Dehumidifiers ›Vacuum with a HEPA filter.
In a real-home study, intensive HEPA vacuuming cut dust mite allergen in carpets by about 81% (Yu et al., 2009).
HEPA vacuums ›Clean the air.
HEPA air cleaners are on leading researchers’ priority list for dust mite reduction (Wilson & Platts-Mills, 2018).
Air purifiers ›Findings are from the cited studies and describe the methods tested, not specific products. See the full step-by-step guide ›
Waterproof dust mite kids pillow protector questions.
Do dust mite covers work?
The evidence is strong. ASCIA recommends covering mattresses, pillows and quilts with dust mite resistant covers, and a 12-month randomised controlled trial found mattress and pillow encasings produced a significant long-term reduction in dust mite allergen (Halken et al., 2003). They work best fully zipped, alongside weekly hot washing of sheets.
Do pillow protectors stop dust mites?
No cover can promise that, and a standard pillow protector isn’t built for it. A dust mite pillow protector is different: it zips the whole pillow inside a barrier, so dust mite allergen built up inside the pillow stays sealed in. This one has a TPU membrane with every pore measured under 1 micron.
Why does a dust mite pillow protector need a zip?
An open or envelope end leaves a gap. A zip closes the pillow in completely, so the barrier has no open side.
Will a waterproof pillow protector make me hot?
It breathes far better than vinyl or PVC, because the microporous TPU membrane lets water vapour through. It is slightly warmer than our 100% cotton pillow protector, so if you sleep hot, cotton is the better choice.
Does it feel or sound like plastic?
No. The membrane sits behind a soft knitted jersey, so the surface feels like fabric and doesn’t crinkle.
Is it good for drool, accidents and sick days?
Yes. The TPU membrane stops liquid reaching the pillow, and the protector is machine washable, no hotter than 60°C.
Which materials are best for dust mite covers?
A fabric whose gaps are smaller than the 10–40 micron particles that carry dust mite allergen, made into a fully zipped cover. Our two options are tightly woven 100% cotton (most breathable) and this knitted jersey with a TPU membrane (waterproof, every pore under 1 micron).
How often should I wash it? Should I wash it before use?
Yes, wash it before first use. ASCIA recommends washing dust mite covers at least every two months; your pillowcase on top gets washed weekly as usual. Wash straight away after a spill. Warm or gentle cycle, no hotter than 60°C. Skip bleach, fabric softener, ironing and hot dryers, which damage the membrane.
How long does it last, and when should I replace it?
Typically 4–5 years. Body oils and essential oils slowly break down the TPU membrane, so warm (not hot) washes help it last. Replace it sooner if the fabric tears or the zip no longer closes fully — a gap means the barrier is broken.
Tech specs
| Outer fabric | 90gsm polyester knitted jersey |
|---|---|
| Lining | 0.2mm microporous TPU waterproof membrane |
| Most common pore size | About 0.16 microns (third-party capillary flow porometry) |
| Mean flow (average) pore size | About 0.54 microns |
| Largest detected pore | About 0.75 microns |
| Size | Child standard, 50 × 69cm |
| Closure | Full-length zip along one short end |
| Care | Warm or gentle wash, no hotter than 60°C. Low or medium dry. No bleach, softener, ironing or dry cleaning. |
| Warranty | 12-month voluntary warranty against manufacturing defects, in addition to your Australian Consumer Law rights. Refund Policy |
| Shipping | Australia only. Free over $150. |
Small print
Not a medical product. We don’t claim this product cures, treats, prevents or relieves allergies, asthma or any medical condition. We describe the fabric’s measured physical properties as a barrier against fine particles and liquids. If you have a diagnosed condition, talk to your GP or allergist.
Barrier performance depends on the protector being fully zipped closed.
Testing. Pore-size figures are from a third-party laboratory test report provided by our manufacturer; a copy is available on request. They describe the fabric, not a guarantee of allergen reduction.
Research (ASCIA; Halken et al., 2003; Visitsunthorn et al., 2010; Wilson & Platts-Mills, 2018; McDonald & Tovey, 1992; Arlian et al., 2001; Yu et al., 2009) is cited as findings of those sources about covers and methods in general, not claims about this product.
Browse all dust mite pillow protectors or every dust mite cover we stock.